Tyrolit Disc is a highly abrasive grinding and cutting tool that is suitable for machining of wide range of materials such as natural stone, marble, metals, concrete, and masonry. It is manufactured by using engineering grade elements such as silicon carbide and diamond that offers high abrasiveness to easily remove materials. It comes in many different sizes and thicknesses as per the clients demand and power tools in which it is going to be installed. The offered Tyrolit Disc shaped tool can be delivered to our clients as per their demands with an assurance of fast and safe delivery.

Precision Cutting for Metalworking

Tyrolits 115 mm reinforced cut-off wheel is designed for exact, clean cuts on ferrous metals, steel, and general metalwork. Its high toughness and optimal bond system enhance reliability and lifespan, making it a valuable tool for professionals seeking accuracy and efficiency with every cut.

Built for Speed and Safety

With a maximum operating speed of 13,300 RPM and a peripheral speed of 80 m/s, this disc supports rapid, safe cutting. The fiberglass backing and resin-bonded construction provide extra reinforcement, minimizing breakage risks and ensuring operator safety in intense working conditions.

Optimized Grain Technology

Formulated with A46P-BF aluminium oxide grains, this disc balances sharpness and durability for consistent performance. Its medium hardness is ideal for a wide range of metal cutting applications, from fabrication shops to construction sites. The black/blue color helps with easy product identification.

FAQs of Tyrolit Disc:

Q: How should the Tyrolit 115 mm cut-off wheel be used for best results?

A: For optimum performance, mount the wheel on a compatible angle grinder or cutting machine. Ensure the operating speed does not exceed 13,300 RPM. Use light, steady pressure and avoid twisting the wheel during cuts to maintain precision and prevent damage.

Q: What materials can this cut-off wheel effectively cut?

A: This Tyrolit disc is specifically engineered for cutting ferrous metals, including steel and other general metalworking materials. Its high-toughness aluminium oxide grain ensures smooth, efficient cutting on a variety of metal types.

Q: When is it appropriate to replace the cut-off wheel?

A: Replace the disc when it shows signs of excessive wear, reduced cutting efficiency, visible damage, or if the wheel diameter is significantly reduced. Always inspect before each use to ensure safety.

Q: Where can the Tyrolit reinforced cut-off wheel be purchased in India?

A: This product is widely available through authorized distributors, suppliers, and traders across India. Many industrial supply stores and online platforms also stock this disc for customer convenience.

Q: What is the process for installing the cut-off wheel on a machine?

A: To install, first select a machine that supports a 115 mm disc with a 22.23 mm bore. Secure the disc using the correct flanges, tighten the locking nut, and check for firm attachment before operating the machine at the recommended speed.

Q: What are the primary benefits of using a reinforced, resin-bonded cut-off wheel like this one?

A: The reinforced fiberglass backing enhances structural integrity, while the resin bond provides durability and flexibility. This results in improved safety, longevity, and reduced risk of breakage during high-speed cutting processes.

Q: Why is aluminium oxide chosen as the grain type for this disc?

A: Aluminium oxide offers a good balance of hardness, toughness, and cutting speed, making it ideal for cutting ferrous metals. Its structure helps maintain sharp edges over prolonged use, delivering consistent performance in demanding environments.

Tell us about your requirement